Sometimes we want to show 3D information in a drawing, in places such as a profile view. If only we had a 3D Civil Engineering software program. Unfortunately we are stuck with Civil 1-1/2D to do our design and we have to do workarounds to get 3D information to show up correctly. In this case I want to project a multiview block into a profile view in order to see the shape of an Urban Industrial Bin. Now I can’t get it to show up by just including the Multiview block in the profile view.
In order to get it to show up I need to create a block of the multiview block in the position that I want to show in the profile view. Now if you might have worked with multiview blocks before and found that they only show in the plan view in plan view. Unfortunately Autodesk hasn’t programmed the multiview blocks to show in the appropriate view when the multiview is projected to a profile view.
In order to fix this definition and get the program to Civil 1-3/4D we can follow these instructions.
- First insert a block that represents the model view of the Multiview block. If it is an Autodesk created multiview block it should have an _M after the block name.
- Next rotate the block to the correct view you want it to show up in the profile view. You might want to try utilizing the 3DRotate command. My block looked like this once I was done.
- Next copy it with a base point and paste it as block. Then right click and rename the block that makes sense. In my case I called it UrbanIndustrialBin-Profile.
- Now project the CogoPoint to the profile view desired.
- Create a Point Style that will reflect the exaggeration of the profile view and the block created for this purpose. Here are my settings.
Here is in the Project Objects to Profile View dialog box.
Now my project object looks like an industrial bin is hanging out on my profile view.
So while it’s not easy to do, it is possible to get a multiview block to look correct in a profile view. Now it won’t be perfect, but it’s closer then what we did have.
No comments:
Post a Comment