Ad

Monday, June 08, 2009

Quick Superelevation Post

Subassemblies that may be used. Other subassemblies will also use the superelevation from the Alignment Properties.

image

Depending on the subassembly used, change the values in the Alignment properties to match the diagram on the plans:

image

I only showed the left side in the picture above, you’ll need to do it also for the right side. If you have a design speed set up and a superelevation table you can also set the superelevation based on the Caltrans superelevation data. But based on the type of road, I don’t think that would work in this case.

No comments:

LinkWithin

Blog Widget by LinkWithin

Ad